# 2. Product Assembly

<span style="color: rgb(255, 0, 0);">***Step1***</span>

As shown below, the kit includes a glove, Nano board, expansion board, MPU6050 module, and BT24 Bluetooth master module (the 9 V battery is **not** included).  

![](media/1.png)

<span style="color: rgb(255, 0, 0);">***Step2***</span>

Insert the NANO board into the expansion board according to the pin layout. 

Next, mount the Bluetooth module onto the expansion board as illustrated:  

![](media/2.png)

<span style="color: rgb(255, 0, 0);">***Step3***</span>

Pin sequence:  

(GND → GND) (VCC → VCC) (TX → RX) (RX → TX)  

![](media/3.png)

<span style="color: rgb(255, 0, 0);">***Step4***</span>

Install the MPU6050 module on the expansion board as shown:  

![](media/4.png)

<span style="color: rgb(255, 0, 0);">***Step5***</span>

(GND → GND) (VCC → VCC) (SDA → SDA) (SCL → SCL) 

![](media/5.png)

<span style="color: rgb(255, 0, 0);">***Step6***</span>

Peel off the protective film from the double-sided foam tape on the back of the board, stick it to the back of a glove, and press firmly to secure.  

![](media/6.png)

<span style="color: rgb(255, 0, 0);">***Step7***</span>  

Assembly completed.  

![](media/7.png)